Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Tempe?
Duct repair and sealing in Tempe typically costs $350 to $1,500 for most homes, with whole-house sealing and small section repairs landing in the $600 to $1,200 range. Spot repairs on a single run of flex duct usually run $180 to $450, while a larger network with multiple disconnected joints and crushed runs can push toward $2,000. The written estimate sets the final price, and that estimate is free.
If you’ve been watching your summer electric bill climb while one or two rooms never quite cool down, leaking ductwork is a common culprit in Tempe. We run Rotobrush rotary-brush systems and Nikro negative-air equipment, and along the way we find the compromised runs, not just the dust. Air Duct Repair is one of our three core services for exactly that reason: cleaning around a torn joint doesn’t fix the leak.
Key Takeaways
- Typical Tempe duct repair and sealing jobs land between $350 and $1,500, and the written estimate sets the final price.
- Spot repairs on one run run $180 to $450; full-house sealing with multiple fixes runs $900 to $2,000.
- Attic runs in Tempe take a beating from summer heat, and heat-degraded connections are a frequent find.
- Air Duct Repair means we fix compromised ductwork, not just hand you a report.
- Free estimates. Call (866) 261-1801 – we answer 24/7.
Duct Repair & Sealing Cost Breakdown (2026)
Here’s how the line items break out for a typical Tempe job. Ranges reflect common residential scenarios; your actual price depends on access, duct material, and how many problems we find once we’re inside the system.
| Line Item | Typical Range | What’s Involved |
|---|---|---|
| Spot repair on a single run | $180 – $450 | Reconnect or patch one torn flex duct, damaged boot, or loose joint |
| Joint sealing (per register/joint) | $25 – $75 | Mastic or foil-tape seal at plenum, boots, and connection points |
| Full-house duct sealing | $600 – $1,400 | Sealing every accessible joint, boot, and plenum connection across the system |
| Crushed or disconnected flex run replacement | $300 – $700 per run | Removing a collapsed run and fitting a properly sized replacement |
| Boot replacement (damaged register boot) | $200 – $500 each | Replacing a boot that’s separated from the ceiling or floor |
| Plenum repair or reseal | $350 – $900 | Sealing or repairing the main trunk connection at the air handler |
| Duct cleaning before or after repair | $350 – $700 | Rotobrush mechanical agitation plus Nikro negative-pressure capture |
| Post-repair filtration upgrade | $200 – $800 | Honeywell or Aprilaire filtration hardware quoted separately |
What pushes a job toward the top of these ranges? Access is number one. Ductwork buried in a tight attic, routed through a soffit with no clearance, or tucked behind a finished ceiling takes longer to reach and work around. Duct material matters too: old rigid metal with failing mastic seals is a different job than flex duct that’s been crushed or torn. And the number of problem spots matters most – one disconnected joint is a spot repair; six or eight of them across a house is a sealing project.
What keeps costs down? Catching a failing joint before the run collapses. A $25 seal today beats a $600 run replacement later. That’s the practical argument for a proper inspection when you first notice uneven airflow, and it’s why we encourage homeowners to call (866) 261-1801 for a free estimate rather than waiting for the whole system to degrade.
What Affects Duct Repair & Sealing Pricing in Tempe
Tempe homes present a specific set of duct problems, and they show up in the price. Here’s what drives cost up or down in this market.
- Attic heat and duct degradation. Tempe summers push attic temperatures high enough to stress flex duct and degrade the foil-tape and mastic seals holding joints together. Heat-degraded connections are one of the most common problems we find. The hotter the attic, the faster seals fail, which is why sealing jobs that would last years elsewhere sometimes need attention sooner here.
- Duct material and age of the system. Rigid metal duct with a failing mastic seal repairs differently than crushed flex. Older homes in neighborhoods like Mitchell Park or Maple-Ash often have rigid systems with joints that have opened up over many summers, which is a sealing job rather than a replacement job in most cases.
- Access and attic routing. A run that’s easy to reach takes less time than one wedged against a knee wall or buried under blown insulation. Access is a labor factor, and labor is the biggest single driver of any repair estimate.
- Number and location of problem spots. One bad run versus six changes the scope entirely. So does location: a boot under a second-floor register is a different job than a plenum connection at the air handler.
- Whether cleaning is needed first or after. If the system has been pulling dust through a torn joint, cleaning before or after the repair is the right call. Our duct cleaning Tempe service uses Rotobrush rotary-brush agitation paired with Nikro negative-air capture, so dislodged debris is collected at the source rather than pushed into living space.
- Containment needs. When a job involves significant debris or disturbed material, we deploy Abatement Technologies air filtration units, the same equipment class used in professional remediation work. That’s a real cost factor when the job calls for it, and it’s part of why our equipment list matters.
There’s one local pattern worth naming. Tempe has a lot of ranch-era housing and a lot of newer infill, and the duct systems in each behave differently. Older homes tend to have rigid trunk-and-branch systems where joints have loosened over decades of heat cycling. Newer builds often use long flex runs that can crush or kink at tight turns, choking airflow to the far end of the house. Neither is unusual; both are fixable. The estimate tells you which one you’re dealing with.
How to Save on Duct Repair & Sealing
Duct repair is one of those jobs where catching problems early saves real money. Here’s how to keep the bill on the lower end of these ranges.
- Get the estimate before the problem spreads. A free estimate on a suspected leak costs you nothing. Waiting until a crushed run has been dumping conditioned air into the attic for a full summer costs quite a bit. Call (866) 261-1801 and we’ll get eyes on it.
- Bundle cleaning and repair into one visit. Our scope covers Air Duct Cleaning, Dryer Vent Cleaning, and Air Duct Repair, so combining services under one visit avoids coordinating multiple contractors. That’s less mobilization and less total cost than booking them separately.
- Ask about filtration while the system is open. Clean ducts are the starting point; the right filtration keeps them that way. We work with Honeywell and Aprilaire equipment, and a filtration upgrade after a repair can reduce how quickly the system loads back up with dust. It’s quoted separately so you can decide on the spot.
- Fix sealing before replacement. If your ducts are intact but leaky, sealing is almost always cheaper than replacing runs. Ask specifically whether the joint can be resealed or whether the run genuinely needs replacement. A straight answer saves you money.
- Know your dryer vent is a separate fire risk. Tempe homeowners often lump dryer vent work in with duct cleaning. Lint buildup in a dryer vent is a real fire hazard, not a maintenance afterthought, and clearing it during the same visit is sensible scheduling.
- Take before-and-after documentation seriously. A single visit that produces a repair and a clear record of what was sealed helps you track whether the same joints fail again. It also protects resale value if you ever sell.
Can Duct Sealing Lower My Energy Bill in Tempe?
Yes, sealing leaking ductwork can reduce cooling costs, though the exact savings depend on how leaky your system was to begin with. In a climate where the air conditioner runs hard for months, every sealed joint in a duct run through a hot attic is air you’re no longer paying to cool and then lose. We don’t quote specific percentage savings because the honest answer is that it varies by house, but the mechanism is straightforward: less leakage means less wasted conditioned air.
The corollary matters too. If your ducts are sealed but your system is still struggling, sealing alone won’t fix it. That’s why we diagnose the whole airflow pathway rather than just one joint. Our technicians have up to 10 years of experience reading duct systems and can tell you whether you’re looking at a sealing job, a repair, or something outside our scope (we don’t do full HVAC installation or duct replacement, and we’ll say so).
For a broader look at what we handle across the city, the Tempe service area page covers the range.
Should You Repair or Replace Damaged Ductwork?
Repair is the right call when the duct material itself is sound and the problem is at joints, connections, or boots. Replacement makes sense when a run has collapsed, is saturated, or is damaged beyond what sealing can fix. Most of the Tempe jobs we see fall into the repair category: loose joints, separated boots, failing mastic seals, and heat-degraded tape.
The rule of thumb is simple. If the duct is structurally intact and the leak is at a seam or connection, seal or repair it. If the duct itself is crushed, torn open, or disconnected from its boot, that run needs replacement. Our Air Duct Repair service covers both, and the estimate tells you which one you’re facing before any work starts. We don’t walk away from a compromised run with a report and a recommendation – we fix what we find.
One caution worth stating plainly: if you’re considering touching ductwork near a gas appliance or doing anything that involves the air handler or electrical connections, that’s not a homeowner job. Those components carry real risk, and a trained professional should handle them. Our scope is the duct pathway; anything involving gas lines or the electrical side of the system needs a licensed trade specialist, and we’ll tell you when we see it.
What Does a Typical Duct Repair Visit Involve?
A typical visit starts with a system walkthrough: air handler, plenum, trunk, and each accessible run. We check joints, boots, and connections, and we use negative-air equipment to see where the system is pulling from. If cleaning is part of the scope, we run Rotobrush rotary-brush agitation through each branch while Nikro negative-air equipment captures the dislodged debris at the source. Guardsman surface-protection products go down first to protect your floors and furnishings.
Then the repair work: sealing joints with mastic or foil tape, reconnecting separated boots, replacing crushed runs where needed, and resealing the plenum. If you want filtration recommendations, that conversation happens near the end, with Honeywell and Aprilaire options laid out. The visit is thorough by design – the mechanical process takes the time it takes, and we’d rather do it right than rush a system that affects every room in the house.
FAQs – Duct Repair & Sealing Cost
How much does duct repair cost in Tempe?
Duct repair in Tempe typically runs $180 to $450 for a single spot repair and $600 to $1,500 or more for a whole-house sealing and repair job, depending on scope and access. The written estimate sets the final price. Call (866) 261-1801 for an exact quote – estimates are free.
Is duct sealing worth the cost?
Yes, in most leaky-duct cases it pays back through reduced cooling loss, especially in a climate where the AC runs hard. Sealing costs less than replacing runs and addresses the leak at its source. Call (866) 261-1801 to find out what your system needs.
How much does duct cleaning cost in Tempe?
Duct cleaning in Tempe typically runs $350 to $700 for a standard residential system, using Rotobrush mechanical agitation and Nikro negative-air capture. If cleaning is bundled with repair in the same visit, it’s often more economical than booking separately. Call (866) 261-1801 for a combined estimate.
Can you fix a crushed duct, or does it need full replacement?
A crushed run is replaced, not sealed, and that typically costs $300 to $700 per run. An intact but leaky run can usually be sealed for far less. The estimate tells you which situation you’re in. Call (866) 261-1801 to book an inspection.
What does the duct repair estimate include?
The estimate is free and covers the full walkthrough: air handler, plenum, trunk, and accessible runs, with a line-item price for each recommended repair. It also covers any cleaning or filtration recommendations. Call (866) 261-1801. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do you repair dryer vents too?
Yes. Dryer vent clearing is one of our three core services, and it’s often scheduled alongside duct work. Lint buildup in a dryer vent is a fire risk, and clearing it during the same visit saves a second appointment. Call (866) 261-1801 to add it to your estimate.
Book a Free Duct Repair Estimate in Tempe
If you’ve noticed uneven cooling, a musty smell, or a bill that’s crept up, a free estimate is the fastest way to know what’s actually going on. We’ll walk the system, tell you what we find, and give you a written price before any work starts. Call (866) 261-1801. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’d like to talk through duct cleaning or dryer vent work in the same visit, say so when you call and we’ll scope it into one appointment.
Professional-grade equipment, not consumer shortcuts. If your ductwork has a problem, we find it and we fix it. That’s the whole point of offering Air Duct Repair as a service.
Written by the team at Duct Cleaning Tempe.
Pricing reflects the Tempe market as of 2026. Duct Cleaning Tempe offers free estimates – call (866) 261-1801.
What Our Customers Say
"Ran a negative air machine on the whole system rather than the shop vac on a stick that the cheap outfit down the road uses. Showed me the before and after photos from inside the trunk line and it was genuinely disgusting."
- Doug Norris"Did the dryer vent while they were here for a small add on price. The dryer now finishes a load in one cycle instead of two."
- Gilbert Martinez"Fair price and thorough work. They ran about an hour and a half past the estimated finish time, so don't schedule anything tight after."
- Gilbert Garcia